Artec Evaporator

Coil

Using Inner Grooved Turbocoils in Freon systems have the highest level of efficiency and heating exchange with the appropriate thickness compatible with grooves.

Aluminum fins which are manufactured by using modern technology and designed in special grooves (turbulence) with sine waves, would bring high efficiency system with minimum difrust time.

The fins can make turbulent flow to develop the heat transfer coefficient and improve the coil efficiency. The triangular arrangement of the pipes makes the air in contact with the entire surface of the pipe. Also, the distance between the tubes is measured in a way to create a high balance between the flowing refrigerant volume and exchanging level. The coils then will be tested under 400psi Azote pressure after being cleansed and removing of grease.

After discharging the coils will again be filled with 150psi. Approved by AHRI institute, the designing of Artec coils is done via applying the most advanced software technology in the world. The evaporator Artec coils are made out of 1/2 tube and the above specifications.

Axial Fan

The Axial fans (external rotor) used in our manufacturing line are available in different sizes of  35cm, 42cm, 5cm0 and 63cm, with speeds of RPM 1350 & RPM 1320 , with IP54 protection class and F heating class are in complete accordance with CE Europe standards.

Fan blades are made out of light Aluminum with considerable resistance and appropriate angle to air throttling.  Such process can maximize the air transport volume and minimize the power consumption and noise.

Such fans are equipped with thermal protection system against extra loading and guard grills which comply with highest international standards.

Heating Element/cable

Using high quality waterproof and stainless-steel heating elements is one of the outstanding features of Artec evaporators. Terminal box with IP64 protection class is placed on Artec units for installing the electrical cable and heating cable.